GCCC Forums  

Go Back   GCCC Forums > Public Information

Forgot your password? Click here!


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-21-2013, 12:04 PM
changbing changbing is offline
Member
 
Join Date: Mar 2009
Posts: 31
Default PRWeb: CO2 Monitoring Capability Makes a Giant Step Forward for Oil Industry

http://www.prweb.com/releases/2013/1/prweb10371679.htm

SR2020 3DProVSP reservoir monitoring images the physical and chemical effects of EOR-CO2 injection on the reservoir--tracking the spread of CO2 inside and potentially outside the reservoir, as well as the redistribution of oil and gas over time. SR2020's high resolution methods and data accuracy can help accelerate and increase recovery, provide insight into well and injectant placement, and reduce the cost of infrastructure and improve financial performance.

3d vsp with co2 injection
3D VSP Illuminates CO2 Plume Migration
Quote startThis capability is a significant technical and financial step for the multitude of oil producers.
-Dr. Martin Karrenbach,Quote end

Bakersfield, California (PRWEB) January 30, 2013

CO2 injection into oil reservoirs has been used extensively in the oil field and is recognized as a leading Enhanced Oil Recovery (EOR) technique. At the forefront of this effort is SR02020’s PRO 3D VSP advanced seismic monitoring capability. SR2020 provides high definition seismic images and data that enable oil producers to better predict and detect the migration pathways of CO2 through rock that rests thousands of feet below the earth’s surface. Interestingly, this capability has recently given the oil industry and EOR efforts a giant step forward as a promising means of CO2 sequestration.

EOR projects inject expensive fluids and gases into the subsurface to move hydrocarbons to producing wells. These fluids move based on the pattern of injectors, producers and variations in the geology. Common problems for EOR are breaches in sealing shale beds, undetected faults that are barriers or vertical conduits to fluid movement, stratigraphic channeling and pinch outs that can redirect fluids, anisotropic permeability, and discontinuities in the reservoir that reduce the effectiveness of the project. Over time, the injection program will redistribute hydrocarbons and formation pressures, changing the fluid dynamics and altering fluid flow. Areas may be left unaffected by the injected fluids while other areas may be completely processed by the injected fluids earlier than predicted.

In the case of CO2 sequestration, gas is injected into the subsurface, but in this case into deep saline reservoirs for permanent disposal. Facilities can be expensive and collection and distribution systems extensive. The gas may channel into and through high permeability portions of the reservoir. If this highly mobile gas finds faults or other boundaries which are either barriers or conduits to flow undesirable movement may result.

Direct and periodic monitoring of the subsurface will document the movement of fluids and gases and provide valuable insight into the efficiency and effectiveness of CO2 injections, but traditional efforts are often less than satisfactory.
Oil and gas reservoirs consist of porous rocks covered by a non-porous cap rock, in a location that traps, concentrates, and prevents further loss of hydrocarbons. Several thousand oil and gas fields are many decades old, and seemingly near the end of their economically productive lives. Using standard petroleum extraction methods, most oil fields recover only approximately 20-40% of the original oil in the reservoir. The EOR technique of CO2 flood into a reservoir is a process which has the potential to increase an oil field's recovery rate up to 60% and almost doubling the oil field's life, extending it by decades.

When CO2 is injected for EOR it reaches and interacts with oil that cannot be produced using standard petroleum extraction methods. The CO2 causes the oil to "inflate" or swell and become less viscous, making it more fluid - both in property and flow. The swelling of the oil by the CO2 enables it to push the oil to the production wells, increasing production.

SR2020's PRO 3D VSP offers a direct and specific method to establish an effective and well-placed CO2-EO. The PRO 3D VSP captures a high definition "picture" of both the pre-CO2 flood formation dynamics, while monitoring the impact, saturation, flow, and interaction of reservoir fluids during and after a CO2 flood. This enables any necessary modification of the CO2 injection placement or setup.

It is important to have a strong, HD analysis and picture of the pre-injection reservoir- a baseline from which to compare post-injection changes in fluid properties, potential leaks, and seismic activity. Historical knowledge of the production, well bores, and geological data of a reservoir are all important pieces of information to determine a plan for EOR via a CO2 flood and establish the baseline. Production data sampling, surface seismic monitoring, are viable standard tools. However, PRO 3D VSP and related borehole imaging technologies (e.g. cross-well tomography, 2DWAWVSP, CVSP) are well established and relatively inexpensive methods of directly monitoring injected fluids into the subsurface. These high resolution methods can help accelerate and increase recovery, provide insight into well and injectant placement, and reduce the cost of infrastructure.

Overall Benefits of SR2020's PRO 3D VSP Monitoring:

Direct, High Definition monitoring of injected fluids over time
Maximizing the value of injected fluids by targeting unprocessed zones
Recognizing breaches in sealing shales and presence of permeable faults
Accelerate and maximize oil recovery
Reduce the cost of infrastructure and improve overall financial performance

SR2020, Inc., established in 1998 and headquartered in Brea, California, is an independent services and technology company dedicated to answering difficult reservoir management questions through the application of advanced borehole seismic methods. They have offices in Houston, and Dubai.

SR2020 Inc. Company Contact:
Bill Bartling, President and CEO
SR2020 Inc.

Todd W. Michael, Sr. Account Executive
SR2020 Inc.

http://www.sr2020inc.com
(714) 482-1922
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:06 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.