CO2 Brine Database

General Information
Geologic Parameters
1 Depth to Top:
2 Permeability/Hydraulic Conductivity:
3 Formation Thickness:
4 Net Sand Thickness:
5 Percent Shale:
6 Continuity:
7 Top Seal Thickness:
8 Continuity of top seal:
9 Hydrocarbon Production:
10 Fluid Residence Time:
11 Flow Direction Elevation:
12 CO₂ Solubility Brine	12a Temperature:
	12b Pressure:
	12c Salinity:
13 Rock/Water Reaction:
14 Rock Porosity:
15 Water Chemistry:
16 Rock Mineralogy:

Lower Potomac Group, Eastern Coastal Plain of Maryland, Delaware, and New Jersey

Comments on Geologic Parameters

13 Rock/Water Reaction:

Several authors presented descriptions of the mineral composition of the lower Potomac interval (Anderson, 1948; Kasabach and Scudder, 1961; Maher and Applin, 1971; Trapp and others, 1984; Benson and others, 1985). These studies indicate that the sands of the lower Potomac aquifer contain low proportions of reactive minerals such as calcium plagioclase and calcite; however, glauconite is present. In addition, studies indicate that because the formation waters have been in place for >15,000 yr, they have most likely approached equilibrium with the surrounding formations. We therefore conclude that the potential for significant rock/water reactions with high CO₂ fluids for eastern New Jersey, Delaware, and Maryland are low to moderate.

13 Reference:

Anderson, J. L., 1948, Cretaceous and Tertiary subsurface geology: State of Maryland Board of Natural Resources, Bulletin 2, 456 p.