General Setting
Information Search and Selection

Com ments

on

Geo logic

Para meters

1 Depth:

2 Permeability/Hydraulic Conductivity:

3 Formation Thickness:
4 Net Sand Thickness:
5 Percent Shale:
6 Continuity:
7 Top Seal Thickness:
8 Continuity of top seal:
9 Hydrocarbon Production:
10 Fluid Residence Time:
11 Flow Direction Elevation:

12

CO2 Solu bility Brine

 12a Temperature:
12b Pressure:
12c Salinity:
13 Rock/Water Reaction:
14 Porosity:
15 Water Chemistry:
16 Rock Mineralogy:

Repetto Formation, Los Angeles Basin

Comments on Geologic Parameters

4 Net Sand Thickness:

Net sandstone thickness of the Repetto Formation is structurally controlled, with maximum thickness of over 2,000 ft (>609.8 m) in the deepest part of the Los Angeles Basin, coinciding with deep submarine-fan depocenters (Conrey, 1967; Redin, 1991). Sandstone thickness was gridded (c4repettog).

4 Map:

4 Reference:

Conrey, B. L., 1967, Early Pliocene sedimentary history of the Los Angeles Basin, California: California Division of Mines and Geology Special Report 93, 63 p.

Redin, T., 1991, Oil and gas production from submarine fans of the Los Angeles Basin, in Biddle, K. T., ed., Active margin basins: American Association of Petroleum Geologists Memoir 52, p. 239–260.